| 
Bits Of My Own Blog
<<Previous Page Next Page>>
Free Content
|
Playhouse Plans
Playhouse Plans
>The basics of it are as follows:
>
>Decide the length and width you want and make a frame using PVC Pipe and
>the 3 join type fittings (sorry I don't know the name of them, but you have
>3 areas that you can connect pipe to. Connect the sides and front and
>backs and then with the one part facing up attach four corners the desired
>height you wish (minus the roof) now you can leave it like this for a
>square house Use the two connect corners for the top made just like the
>bottom) or you can add an A roof by using a connector like the bottom and
>then cut a length of pipe the same as the length of the house and then
>shape roof by adding lengths that fit from the corners to the upper center
>(these are attached to the center bar using a 3 way connector also. You
>then measure the whole thing and make a cover by sewing the four sides
>together and then adding the roof sections (I seamed it in the middle and
>then sewed it one to each side and I used the pipe as a pattern for the
>roof peek and cut the ends in one piece with the peek on them.We cut a door
>(just a roll up flap that could be tied at the top and I cut a window in
>one side and used clear vinyl inside for a window. I also used a vinyl
>that I found on sale and then I painted a window box and flowers on it....
>
>It really was easy and inexpensive.. If this is not clear I will see if I
>can find the old leaflet I had with the instructions on it and mail you a
>copy if you want to try it...
>
>Also years ago I made one for my son and I used fabric that was cut to
>match each side and then I used grommets and yarn to tie it on to the sides
>so it was easy to take down and put back up...
>
>We did this when our granddaughter was 3 years old and she loved it!!!!
>
>Anyone need help??????? Just ask and I will hunt down the instructions...
>
>Cheryl
>
free web content
Index:
A
B
C
D
E
F
G
H
J
K
L
M
N
O
P
R
S
T
V
W
|
|
